Grandma's Dresser #2

As seen in mt previous post, I have inherited a bedroom set.  It took some time to convince my self to paint it but once I fixed up one piece, I was ready to start working on the rest.  This piece was a long dresser with an detachable mirror.  I thought it would make an EXCELLENT TV console.  It is the perfect size and I could still store things I don't use that often (perfect for winter items an accessories!).

Supplies
Paint
New handles and knobs
Drill

What I did
I started by sanding down the areas that needed some help and wiping everything down. I filled the previous holes from the knobs, then it was as simple as a couple coats of paint.   Once the paint was dry, I measured where I needed the new holes and drilled.  I attached the knobs and that was it. 

 

 

 

 

Before

After

What I'm working on next:
As I am moving in a few days, I will be taking a short break, but don't worry because there will be many more projects to come!!!

DIY Headboard

I have purchased a new bed for my new apartment and I was most excited about getting a new headboard!  I have been searching for the perfect upholstered headboard and after seeing the RIDICULOUS prices I finally decided to make my own.  The adventure started at Home Depot when I clearly didn't realize the size of my car and I drove the 6 miles to my apartment with wood strapped to the roof going 20mph on a very busy road.  Either way it was worth it!

Supplies
2 2x4s cut to the desired height
Plywood cut to dimensions based on bed size
Foam
Batting
Fabric
Staple gun
Buttons, upholstery needle, and upholstery thread (if desired)

What I did
First measure the width of your bed to determine the width of plywood needed.  A queen bed is a standard 60 inches wide.  Then decided how high you want your headboard to be.  I wanted my headboard to be 5 feet from the ground.  I bought my wood at Home Depot and they will cut wood for you in store.  I got 2 2x4s cut to 5 ft and my plywood cut down to 5 ft.  Standard plywood is 4ft x 8 ft so my final piece was 4ft x 5 ft.  (The 1 ft short in height is fine because it wont be seen either way).  Once I got home, I attached the wood with screws so that the 2x4s were attached to either side of the plywood.  At this point it you are planning on adding buttons, measure and drill holes into the plywood.

Headboard Frame

Next attach form to cover the plywood.  It is MUCH cheaper to use multiple square pieces over one large piece of foam.  I bought my foam on sale and they are 2 inches thick.  Once the foam is attached, use batting to covered the edges and staple to the back of the frame.  Lay out fabric on the floor and lay the frame on top.  Using your staple gun, pull the fabric tight and stapled to the back of the frame.  It is easiest to start in the center of one end and then go to the opposite side and pull tight.  Once you have completely attached the fabric, you can add buttons if desired.  To attach, screw the bottom of the 2x4s to your metal bed frame.

Completed Headboard

I will update with new pictures once I move in and attach it to my bed.

Important tip when choosing fabric!
Pay attention to the way the patten is laid out.  The original fabric I chose had a pattern that ran up and down when on the roll and it was not wide enough to use in that direction (i.e. if I used it the up and down would have run left to right and looked awkward). 


What I'm working on next:
Time to attach the 2nd matching dresser.  

My wine bar needs some love!

I have a wine bar and it is in desperate need of some accessories to pizazz it up.  Do you see those amazing wine cork projects? Whether wreaths or cork boards, I love the idea of recycling wine corks into great decor for your home.  I have been collecting corks for a year now and finally had a substantial size pile.  I decided that I would like to make some artwork for my new wine bar.  I began searching for the perfect wine quote.  It is amazing how many important famous people had a little something to say about wine (or any form of alcohol for that matter!)  I found the perfect quote by Alexander Fleming, credited with discovering penicillin.

Supplies
A piece of wood
Paint
Wine corks
Hot glue gun
Rope

What I did
First I painted a piece of wood that I had with a few coats of paint.  Once I found my quote, I printed it out in a font that I liked in a size large enough to see from a distance.  I placed the print outs on my wood and traced the letters with a pen which makes an indentation in the wood.  I then went back with black acrylic paint and hand painted the letters by following the lines I made from tracing.  This took 2 coats of paint to get a dark enough black.  After the paint was dry, I laid out my corks around the border.  I was short by 10 corks!!  Luckily I was going wine tasting with a friend and the owner graciously gave me a large bag of corks that was enough to do the entire project without the corks that I had collected.  I glued the corks in place.  I then decided that I wanted a little something extra and used rope that I had leftover and glued it around the border of the wood.

I love the sign!!  I am looking forward to using the rest of my corks for a great project in the future to compliment this.

After completing this, I still wanted a little more to add to the bar.  I have a lot of rope leftover from previous projects, and I was searching for ideas to use the rest.  I found great vases that were covered with colored yarn and thought why not do the same with rope?

Supplies
Glass vases--purchased form the Dollar Store
Rope
Glue gun

What I did
First make sure to clean and dry your vases.   I started at the top and glued the rope in place.  Continue to wrap the rope around the vase added glue every couple of inches until you get to the bottom.

This is a great and simple project you can do to jazz up a vase.  As mentioned before you can also use yarn.

What I'm working on next:
I have always wanted a unique headboard and now is the time to make one!

Window Panes

While at a dinner several months ago, I noticed the host has a beautiful and rustic window pane hanging above her couch.  At that moment I was in love and knew that in the future I wanted to find something similar.  I loved the way one rustic piece could transform a modern decor into something special.  I found old window panes at the Habitat for Humanity ReStore for $5.  They had windows of all shapes and sizes to chose from.  I knew that I wanted to do the windows in a couple of different ways.  I was inspired by posts on pinterest showing many uses for old windows. (http://dishfunctionaldesigns.blogspot.com/2012/01/reclaimed-windows.html)

Window before

Supplies
Window panes
Paint
Painter's tape
Contact paper
Scrapbook paper
Ribbon
Wooden monogram letter
Staple gun

What I did:

For both windows:  The windows were not in the best condition and had a lot of chipping paint.  First I removed all of the hardware.  Then I thoroughly cleaned them and tried to scrap off some of the chipping paint.  I then taped off the windows so I wouldn't get paint all over the glass.  Last I painted each window pane with 2 coats of paint.  I only painted the front of the windows because I knew that I was going to be covering the glass and you wouldn't see the back.

Window 1:  I used my leftover contact paper to cover each pane of glass.  Measure the inside of the panes and then cut the contact paper to size.  Carefully stick the contact paper to the glass and make sure to smooth out all of the bubbles.  You can use an exacto knife to cut off any areas where the paper overlaps the wooden frames.  I found a wooden monogram letter at Michael's that was already painted white.  The letters come in a variety of sizes and styles in black and white.  I attached a piece of ribbon to the letter and the frame with a staple gun to hang the letter in place.

Window #1 After

Window 2:  For the second window I found scrapbook paper on sale.  I cut each sheet to size and taped it into place.  I then drilled new holes to put some of the hardware back on so that I could use it to tie ribbon to and hang the frame.  I now can use this window as a dry erase board by writing on the glass with any dry erase marker.

Window #2 After

Window 3:  I currently am in limbo on the third window.  It has been painted but I'm not sure what else I want to do with it.  I may just leave it as is and hang it above my bed.

Window #3 After

What I'm working on next:
I have been collecting wine corks and I want to use them to make a decorative piece for my wine bar.

Old pillows become new again

Before I moved into my current apartment almost 2 years ago, I purchased pillow forms and fabric to add some color to my place.  As I am preparing to change up my decor for my new place, I am ready for a change in pillows as well.  We all have pillows that we once loved that need some refreshing.  New pillows are expense to keep replacing so why not just recover them?  You can change out the color scheme with the season or whenever you feel the need for a change of scenery.  It is far less expensive to buy a yard of fabric to cover a pillow than shell out $20 for a whole new pillow.  I decided to make simple envelope pillow cases that can be changed out easily (and more importantly cheaply!).

Supplies
fabric
old pillow forms
sewing machine


Tutorials:
http://raegunwear.blogspot.com/2011/06/tutorial-quick-envelope-pillow-case.html
OR
http://www.apartmenttherapy.com/how-to-sew-an-envelope-pillow-41722

 I made my pillows from leftover fabric from previous projects as well as purchasing some more coordinating fabrics.  I loved the chance to play around with colors and patterns.  You can also find great deals on hand towels, napkins, table clothes, or curtains and use them as your base for your pillows.  Square napkins are the easiest to make into pillows since they are already hemmed and a standard square pillow size.  Browse the isles of your favorite home stores (especially the clearance section) and see what inspires your next pillow creation.  Have fun with it.  If you hate it after a month, you didn't spend that much money on it!

What I'm working on next:
 I found some old window panes.  Not sure exactly what I'm going to do with them yet

The perfect desk chair......FINALLY!!

I've been on the hunt for a while now.  I've refurbished 2 chairs that didn't work but now I have the perfect chair.  I traded my sister the blue chair in a previous post for a beat up, stained, ugly chair that she stole from my parents when you moved into her new apartment.  I could see the potential.

Chair before

Supplies
Paint
Leftover fabric
Staple gun

What I did
The chair was this awkward pale avocado green that I was not a fan of.  In my efforts to save time I opted not to sand the chair before painting.....BIG MISTAKE!!  I don't know if this chair was stubborn or the finish was too fancy but it took way too many coats of paint to cover the chair.  I used leftover white paint and spent several days painting and waiting and painting some more.  I then took leftover fabric and covered the seat.  Be sure to pull the fabric tight before stapling so it is smooth on time.  After screwing the seat back to the fabric it was finished.

Chair after

Voila!  In love!  I love the chevron fabric and I know it will look perfect in my new apartment!!

What I'm working on next:
My coach pillows are in need of a makeover!!

Glam up a bookcase!

I have been busy adding some much needed pizazz to an old bookcase.  When I originally bought the bookcase, it was unfinished and I decided to stain it.  I was happy with the results but now its time for something new! 

Bookcase before

Supplies
Paint
Contact paper


What I did

The first step was painting.  I have a ton of paint laying around so this part was FREE.  After 2 coats of paint it was time to make this project a little special.

Bookcase after painting

While browsing the aisles of TJ Maxx I found beautiful gray contact paper with yellow flowers.  I love contact paper because A) it already has a sticky back so I don't have to get out glue and B) it has nice grid lines on the back that make it easy to measure and cut to size.  I measured the inside and cut the paper to size.  Don't worry if the cuts aren't exact....you can easily take an exacto knife and trim the paper after it is placed.  Peel off a little bit of the backing paper at a time and smooth the paper as it sticks.  I used a spatula to push out air bubbles.  If you have a stubborn air bubble you can lift the paper up and and try again to place it smoothly.

Bookcase after

Close up of the contact paper

I LOVE the finished result!!  The best projects are the ones that are inspired when you aren't even looking for inspiration!  Thank you TJ Maxx for the help!

What I'm working on next:
I have finally found the perfect desk chair!!!  Can't wait to finish it